Jiffypin Instructions (20, 22 gauge wire)

For slow-flyers and other low-current uses.   Cut off the entire solder cup and solder the wire alongside the stem as shown.
		Solder the end of the wire to the pins' "stem" and then cover the pins with heat-shrink. (above) <<< A shear-type cutter is best for this but a regular small cutter will also work.

Foam Sheets -	Zepron (white - thick, medium, thin)
Carbon Fiber & - Composites	Smooth CF Tubes     Wrapped CF Tubes     Round CF Rods Flat CF Stock     Carbon Strips     Carbon Tow     Kevlar Tow "Carbon" Fittings     Metal Ferrules     Carbonara
Electrical Stuff -	CS Shrink     JiffyPins     Silicone Wire     Flex Shrink Servo Wire / Connectors     JST Connectors
Tools -	Carbon Cutter    CS-3 blades   Mini-Tool Sets   Sanding Sticks "Crazy Knife"   Mini Saw Blades   Dial Caliper   Rotary Cutter Compass Cutter   "Mother of All Scissors"   Hold-It's
Stick'ums -	Blenderm     CA Glues     SS tape     Transfer Tape
Other -	Prop Adaptors     Du-Bro Parts     Sulivan Parts DraganFlyer / RoswellFlyer Rotors     Folding Prop for IPS Other PF Stuff     TT Inserts     Lights, Lights, Lights!